机车车载漏电流数字传感器研究与应用

介绍一种机车车载漏电流数字传感器的研究与应用,在模拟漏电流传感器的基础上,经数字化改进而实现.硬件设计采用ARM平台,在分析系统原理的基础上,完成了硬件系统和软件架构的设计,完成了单线和双线的模拟实验.经模拟实验验证检测准确、反应快速,通信采用CAN总线安全可靠.在实际测量中,验证了模拟实验的正确性,设计可行.     

聚合物固载催化剂的研究进展

介绍聚合物固载催化剂有6类,包括离子交换树脂催化剂,聚合物固载的相转移催化剂,聚合物固载的酸催化剂,聚合物固载的碱催化剂,聚合物固载的金属催化剂,聚合物固载的生物催化剂等。综述了近年来聚合物固载催化剂的研究进展。     

Manufacturing and foaming of high melt viscosity of polypropylene by using electron beam radiation technology

The high melt viscosity of polypropylene was studied by grafting bifunctional monomers, 1,6‐hexanediol diacrylate (HDDA) and tripropylene glycol diacrylate (TPGDA), onto homopolypropylene (HPP) and random ter‐polypropylene (RTPP) under electron‐beam irradiation. Creation of the high‐melt‐viscosity polypropylene was possible at low radiation dosage and low monomer content, under a prohibition of both radiation degradation and homopolymerization. TPGDA monomer was more effective in increasing the melt viscosity of HPP compared with RTPP, whereas HDDA monomer was more effective for enhancing the melt viscosity of RTPP. Such different effects of monomers on melt viscosity may arise from different monomer structures, namely, TPGDA has additional three methyl groups, but HDDA has no methyl groups. Electron‐beam radiation technology, on an increase of the melt viscosity, was much more effective in HPP than RTPP, when compared with virgin polymers. Modified RTPP and HPP with high melt viscosity were capable of foaming with numerous fine cells, of which the modified HPP with 1.5 mmol TPGDA and 0.5 kGy could create more spherical foam cells and its bending strength was 1.5 times more than that of the foamed RTPP. POLYM. ENG. SCI., 46:431–437, 2006. © 2006 Society of Plastics Engineers.     

基于STM32平台的CAN总线车载式漏电流数字传感器

介绍一种基于STM32平台的CAN总线车载式漏电流数字传感器的设计。在高精度模拟漏电流传感器的基础上,采用CAN总线进行数据通信,在目前高端的、低功耗、小系统设计处理器Cortex—M3(STM32)上经数字化改进而实现。该漏电流数字传感器经实验验证检测准确、响应快速、数据通信安全可靠,是目前一种先进的车载式漏电流数字传感器。实际使用时,由多个漏电流数字传感器与一台计算机互接,构成一个多点的漏电检测网络,最终实现漏电检测的综合处理。     

Efective Object Identification and Association by Varying Coverage Through RFID Power Control简

This paper presents an effective power scheduling strategy for energy efficient multiple objects identification and association. The proposed method can be utilized in many heterogeneous surveillance systems with visual sensors and RFID （radio-frequency identification） readers where energy efficiency as well as association rate are critical Multiple objects positions and trajectory estimates are used to decide the power level of RFID readers. Several key parameters including the time windows and the distance separations are defined in the method in order to minimize the effects of RFID coverage uncertainty. The power cost model is defined and incorporated into the method to minimize energy consumption and to maximize association performance. The proposed method computes the power cost using the range of the outermost position for possible single association and group associations at every sampling time. An RFID reader is activated with the proper coverage range when the power cost for the current time is lower than the power cost for the next time sample. The simplicity of the power cost model relieves the problematic combinatorial comparisons in multiple object cases. The performance comparison simulation with the minimum and maximum energy consumption shows that the proposed method achieves fast single associations with less energy consumption. Finally, the realistic comparison simulation with the fixed range RFID readers demonstrates that the proposed method outperforms the fixed ranges in terms of single association rate and energy consumption.     

Communicating Is Crowdsourcing: Wi-Fi Indoor Localization with CSI-Based Speed Estimation

Numerous indoor localization techniques have been proposed recently to meet the intensive demand for location-based service (LBS). Among them, the most popular solutions are the Wi-Fi fingerprint-based approaches. The core challenge is to lower the cost of fingerprint site-survey. One of the trends is to collect the piecewise data from clients and establish the radio map in crowdsourcing manner. However the low participation rate blocks the practical use. In this work, we propose a passive crowdsourcing channel state information (CSI) based indoor localization scheme, C²IL. Despite a crowdsourcing based approach, our scheme is totally transparent to the client and the only requirement is to connect to our 802.11n access points (APs). C²IL is built upon an innovative method to accurately estimate the moving speed solely based on 802.11n CSI. Knowing the walking speed of a client and its surrounding APs, a graph matching algorithm is employed to extract the received signal strength (RSS) fingerprints and establish the fingerprint map. For localization phase, we design a trajectory clustering based localization algorithm to provide precise real-time indoor localization and tracking. We develop and deploy a practical working system of C²IL in a large office environment. Extensive evaluations indicate that the error of speed estimation is within 3%, and the localization error is within 2 m at 80% time in a very complex indoor environment.     

在线红外检测仪在头孢噻肟酸合成中的应用

利用在线红外检测仪ReactIRTM4000在线监测以7-氨基头孢烷酸(7-ACA)与2-甲氧亚氨基-2-(2-氨基-4-噻唑基)-硫代乙酸苯并噻唑酯(MEAM)为原料,用二甲基乙酰胺(DMA)作催化剂,一步合成头孢噻肟酸的实验过程,主要考察了反应时间对反应的影响。在最佳反应条件下(催化剂用量、反应物用量、结晶pH已经优化)头孢噻肟酸的合成摩尔收率超过98%。     

增塑聚丙烯结晶行为和力学性能的研究

以液体石蜡（LP）为增塑剂，采用双螺杆挤出机对无规共聚聚丙烯（PP）进行了增塑，研究了LP用量对PP力学性能和结晶性能的影响。研究结果表明：PP经过增塑后，冲击强度可提高150％，拉伸强度提高80％，断裂伸长率提高110％；增塑PP的结晶度和热变形温度也有所提高。     

辣椒、番茄中氟虫脲残留量的HPLC分析方法

建立了测定辣椒和番茄中氟虫脲残留量的高效液相色谱法。色谱柱为ThermoHypersil-ODSC18D250mm×4.6mm;流动相:甲醇∶水(80∶20,v∶v);流速:1.0ml/min;检测波长:254nm。试样用丙酮提取,二氯甲烷萃取,中性氧化铝柱净化,外标法定量。在0.05￣0.5mg/kg的添加浓度下,平均回收率为87.51%￣102.13%,变异系数为0.07%￣6.02%,仪器最低检出限为8.809×10-10g,最小检出浓度0.011mg/kg,该方法的准确度、精密度及灵敏度均满足农药残留分析的要求。     

机载前视风切变检测气象雷达的研究进展

机载气象雷达是商业飞机强制安装的机载电子设备,可以称得上是“双眼 ”,它对于保障飞行安全具有举足轻重的作用。目前,机载气象雷达关键技术尚掌握在国外 生 产厂商手中。本文从机载气象雷达系统和机载气象雷达涉及的信号处理技术（包括降水目标 检测、湍流检测和低空风切变检测、地杂波抑制等）两个方面论述了机载气象雷达的发展历 程,指出了其中的关键技术和尚待解决的问题。最后,本文针对下一代具有增强型检测能力的 机载气象雷达系统及其相关技术进行了评述。